Rhino Small 300mm In-Bench Milk Jug Rinser with Spinjet

Rhino Coffee Gear Small Milk Jug Rinser 300mm : Spinjet

The Rhino Coffee Gear RHPR300-S has been designed to fit in the bench of cafes, restaurants, coffee bars, and juice bars. This vessel rinser features a new honeycomb drain tray and a new Actuator Star design, which both help to prevent liquid build-up. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 300mm in length, the RHPR300-S fits multiple milk pitchers comfortably, making it perfect for all busy hospitality environments.

What's in the box?

• 1 x Sink.
• 1 x Single Piece Drain Tray
• 1 x Spinjet mechanism.
• 1 x Actuator plate.
• 1 x 3/8 inch John Guest inlet adapter
• 4 x Mounting clips.

Specifications

• All surfaces are sloped to drain.
• 304 Stainless steel construction.
• Brushed finish sink body and polished rinser mechanism
• No sharp edges, corners are rounded for safety.
• Secure mounting with 4 mounting clips.
• For use with water temperature below 86F.
• Removable drain grate design makes cleaning easy.

Features

• Better Drainage - The drain tray has an improved design to ensure there is no static build-up of residue along with a generous drain outlet.
• Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment.
• Spinjet Spray Mechanism - The new spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea and coffee grounds, milk and other residues that tend to hold firm.
• NSF Certified - All Rhinowares Milk Pitcher Rinsers are NSF Certified.
• Dimensions (approx): 238mm (W) x 300mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of bench.)
• Materials: Stainless Steel
• Drain Hose: 25mm/1" size

Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces.

Operating Pressure Range should be limited to 350 KPA or 35PSI

Depth Requirements:

The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.

What else I might need?

• Pressure reduction valve (MUST BE INSTALLED TO NOT VOID THE WARRANTY) - 620400